±0.05 mm slitting. 300 m/min. Zero burr.
Heavy-duty precision slitting for steel, aluminum, copper and alloys. One integrated line — uncoiler, leveller, slitter, recoiler — engineered in-house and installed in 40+ countries.
- Thickness
- 0.12–25 mm
- Width
- 300–2500 mm
- Accuracy
- ±0.05 mm
- Speed
- 300 m/min
- Coil weight
- 35 t
- Strips
- Up to 12
- Control
- Siemens 840D
- Certification
- CE · ISO 9001
Response within 24 hours · Layout drawing supplied before manufacturing
The three-stage core — one continuous line
Uncoiler, slitter and recoiler are designed, built and tested as a single system. No integration gaps, no split responsibility.
Hydraulic mandrel & coil car
Fast, damage-free coil loading with automatic edge control.
- Peeler & hold-down
- Automatic edge guide
- Coil car synchronized
D2 tool-steel knives · quick-change arbors
0.05 mm radial runout for burr-free strip and repeatable width.
- Automatic knife gap control
- Scrap winder included
- Up to 12 cuts per pass
Constant tension · overarm separator
Damage-free coils with consistent strip tension from start to finish.
- Servo tensioning
- Coil car exit
- Recipe-driven changeover
Technical specifications
Standard TOKO range. Every line is configured to your coil data — thickness, width, speed and automation level are tailored before manufacturing.
| Thickness range | 0.12 – 25.0 mm (MS / SS / Al / Cu) |
|---|---|
| Width range | 300 – 2500 mm |
| Slitting accuracy | ±0.05 mm (standard) · ±0.1 mm (heavy gauge) |
| Line speed | Up to 300 m/min |
| Coil weight | Up to 35 tons |
| Main drive | 110 – 450 kW AC / servo |
| Number of strips | Up to 12 (thin gauge) · 6 (heavy gauge) |
| Control system | Siemens 840D / Mitsubishi CNC |
| Knife material | D2 / M2 tool steel · carbide option |
| Certification | CE marked · full safety compliance |
Materials processed
Where the line runs
Precise, repeatable strip for production environments where tolerance and uptime are not negotiable.
Built to be verified, not just claimed
Procurement teams verify. Every trust element below is concrete, checkable and tied to the slitting line you are evaluating.
10 years, ±0.06 mm
“Our TOKO slitting line has run 16 h/day for 10 years — still holding ±0.06 mm.” — Production Manager, Shivam Steel (India)
ISO 9001:2015 · CE
Full safety compliance. Certification documents and CE declaration available for verification during evaluation.
24 h engineering response
Remote diagnostics standard. Spare parts stocked for 10+ years. Commissioning and operator training by TOKO engineers.
Specification questions
Answers engineers and procurement teams ask before requesting a layout drawing.
What materials can the TOKO slitting line process?
What is the maximum coil weight and line speed?
What control system is used?
Do you customise thickness, width and automation level?
Send your coil data. Get a line configuration.
A TOKO slitting engineer will review your thickness, width, coil weight and target speed — and return a line configuration, layout drawing and budget price, usually within 24 hours.