Features of TOKO Brand Welding Wire AWS A5.18 ER70S-6 (SG2)
Exceptional performance for MIG/MAG welding applications with excellent arc characteristics
Excellent Weldability
- Superior arc stability for smooth welding operation
- Minimal spatter for cleaner welds and less cleanup
- Easy to use for both novice and experienced welders
High Quality Welds
- Produces clean, uniform beads with excellent appearance
- Good wetting action and weld pool control
- Minimal porosity and excellent fusion characteristics
Versatile Applications
- Ideal for carbon steel and low alloy steel welding
- Suitable for automotive, fabrication, and construction
- Excellent for both thin and thick materials
Optimized Chemistry
- Higher silicon content for improved deoxidation
- Excellent mechanical properties in as-welded condition
- Consistent performance across different welding parameters
Mechanical Properties
- Tensile strength typically exceeds 70,000 psi
- Good ductility and impact strength at room temperature
- Meets AWS A5.18 specification requirements
Wide Compatibility
- Compatible with various shielding gases (CO2, Ar/CO2 mixes)
- Suitable for all-position welding with proper technique
- Works well with most MIG/MAG welding equipment
Technical Specifications
| Property | Value | Standard |
|---|---|---|
| Tensile Strength | 70,000 psi (min) | AWS A5.18 |
| Yield Strength | 58,000 psi (min) | AWS A5.18 |
| Elongation | 22% (min) | AWS A5.18 |
| Carbon Content | 0.06-0.15% | AWS A5.18 |
| Manganese Content | 1.40-1.85% | AWS A5.18 |
| Silicon Content | 0.80-1.15% | AWS A5.18 |
| Welding Process | MIG/MAG (GMAW) | - |
| Available Sizes | 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm | - |
The information contained or otherwise referenced herein is presented only as "typical" without guarantee or warranty, and TOKO Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.