What's features of TOKO brand FCW wire AWS A5.20 E71T-1?
The TOKO brand flux cored welding wire AWS A5.20 E71T-1 features a combination of excellent welding performance, material composition, mechanical properties, and versatility in applications. Here are the key features of this welding wire:
-
Excellent Welding Performance:
- The wire is formulated to deposit x-ray quality welds in various positions, including flat, vertical up, horizontal, and overhead.
- It provides a soft and stable arc during welding, ensuring a smooth welding process.
- It has low spatter loss, making post-weld cleaning easier.
- The slag is easily removable, resulting in a beautiful appearance of the weld.
-
Material Composition:
- Made from low carbon steel, the wire has a specific chemical composition that meets industry standards.
- The chemical composition of the deposited metal includes controlled levels of elements such as carbon (C), manganese (Mn), silicon (Si), phosphorus (P), sulfur (S), chromium (Cr), nickel (Ni), molybdenum (Mo), vanadium (V), and copper (Cu).
-
Mechanical Properties:
- The deposited metal exhibits high mechanical properties, including high tensile strength and good ductility.
- The wire is designed to meet or exceed the required yield point, tensile strength, elongation, and impact toughness standards.
-
Shielding Gas:
- The wire is intended for gas-shielded welding using either 100% CO2 or a mixture of 75% argon and 25% CO2 as the shielding gas.
- The recommended gas flow rate is between 15L/min and 25L/min.
-
Versatility in Applications:
- Suitable for welding mild and low carbon steel, structural steel, and pressure vessel grades.
- Can be used in various industries such as shipbuilding, offshore construction, bridge building, and general fabrications.
-
Available Sizes:
- The wire is available in different diameters, including 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm, and 1.6mm, allowing for flexibility in different welding applications.
-
Certifications and Approvals:
- The wire is approved by various international certification bodies such as ABS, ISO, Ce, CCS, TUV, Lr, Gl, BV, Nk, etc., ensuring its quality and reliability.
In summary, If you're interested in the TOKO brand flux cored welding wire AWS A5.29 E81T1-K2C, it's recommended to contact the manufacturer or check their official website for accurate and up-to-date information.
The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and TOKO Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.