What's features of TOKO brand FCW wire AWS A5.29 E81T1-K2C?

 

The TOKO brand flux cored welding wire AWS A5.29 E81T1-K2C features a combination of excellent welding performance, material composition, mechanical properties, and versatility in applications. Here are the key features of this welding wire:

 

General Features of Flux Cored Welding Wire AWS A5.28 E81T1-K2C (or Similar):

  1. High Tensile Strength Deposits:
    • The E81T1-K2C wire is designed to deposit metal with high tensile strength, suitable for welding high-strength steels.
    • The deposited metal typically has a tensile strength in the range of 550-690 MPa or higher, depending on the specific wire formulation and application requirements.
  2. Excellent Welding Performance:
    • The wire provides a stable arc during welding, resulting in smooth and consistent welds.
    • It is suitable for all-position welding, including flat, horizontal, vertical up, and overhead positions, making it versatile for various welding applications.
  3. Gas Shielding:
    • The wire is typically used with a gas shield, often CO2 or a mixture of argon and CO2, to protect the weld pool from atmospheric contamination.
    • The gas shielding helps to minimize porosity and other welding defects, ensuring high-quality welds.
  4. Low Spatter and Easy Slag Removal:
    • Flux cored welding wires, including those similar to E81T1-K2C, are known for producing low levels of spatter during welding, which simplifies post-weld cleaning.
    • The slag formed during welding is typically easy to remove, contributing to a neat and clean weld appearance.
  5. Mechanical Properties:
    • The deposited metal exhibits good ductility and toughness, ensuring that the weld joint can withstand the intended service conditions.
    • The mechanical properties of the weld metal, such as elongation and impact energy, are designed to meet or exceed industry standards for high-strength steels.
  6. Certifications and Approvals:
    • The wire is likely to be certified by relevant international standards bodies, such as the American Welding Society (AWS), to ensure its quality and performance.
    • It may also comply with other regional or national standards, depending on the market it is intended for.
  7. Diameter Availability:
    • The wire is available in various diameters to suit different welding applications and equipment. Common diameters include 1.2mm, 1.6mm, and other sizes as per the manufacturer's offerings.

 

In summary, the TOKO brand flux cored welding wire AWS A5.20 E71T-1 offers a combination of excellent welding performance, precise material composition, high mechanical properties, versatility in applications, and international certifications, making it a suitable choice for various welding needs.

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and TOKO Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.