What's features of TOKO brand TIG Rods ER80S-Ni2?
TOKO brand TIG Rods ER80S-Ni2,the general characteristics of ER80S-Ni2 low-alloy steel electrodes commonly used in the welding industry, we can outline some general features that might apply to TOKO brand TIG Rods ER80S-Ni2:
-
Composition: ER80S-Ni2 is a low-alloy steel electrode specifically designed for welding nickel-alloyed steels. It typically contains a higher percentage of nickel, which improves the weld metal's resistance to cracking and corrosion, particularly in high-stress or low-temperature environments.
-
Mechanical Properties:
- Tensile Strength: Typically, ER80S-Ni2 electrodes exhibit high tensile strength, allowing for strong and durable welds. The specific tensile strength may vary, but it is generally around 630 MPa or higher.
- Yield Strength: The yield strength is also high, usually around 540 MPa, indicating good resistance to deformation under load.
- Elongation: ER80S-Ni2 electrodes offer good ductility, with an elongation percentage of around 30%, allowing the weld metal to withstand deformation without breaking.
-
Impact Resistance: ER80S-Ni2 electrodes are known for their excellent impact toughness, especially at low temperatures. They can maintain high impact values even at temperatures as low as -60 °C, making them suitable for applications in cold environments.
-
Weldability: These electrodes are designed for TIG (Tungsten Inert Gas) welding, also known as GTAW (Gas Tungsten Arc Welding). TIG welding is a precise and versatile welding process that produces high-quality welds with minimal distortion. ER80S-Ni2 electrodes are easy to use and produce clean, smooth welds.
-
Versatility: ER80S-Ni2 electrodes are versatile and can be used in various welding applications, including the repair and joining of nickel-alloyed steels, stainless steels, and other materials with similar properties.
-
Quality and Consistency: As a reputable brand, TOKO likely ensures high-quality control standards in the manufacturing of their TIG Rods ER80S-Ni2. This ensures consistent performance and reliability across different batches of electrodes.
-
Certifications and Standards: TOKO brand TIG Rods ER80S-Ni2 are likely to comply with international standards such as AWS (American Welding Society) and ISO (International Organization for Standardization) standards, ensuring they meet the required quality and performance criteria.
Please note that the specific features of TOKO brand TIG Rods ER80S-Ni2 may vary slightly from the general characteristics mentioned above. For detailed and accurate information, it is recommended to consult the product datasheet or contact TOKO directly.
The information contained or otherwise referenced herein is presented
only as “typical” without guarantee or warranty, and TOKO Corporation
expressly disclaims any liability incurred from any reliance thereon.
Typical data and Test results for mechanical properties, deposit or
electrode composition and other properties were obtained from a weld
produced and tested according to prescribed standards, and should not be
assumed to be the expected results in a particular application or
weldment. Actual results will vary depending on many factors, including,
but not limited to, weld procedure, plate chemistry and temperature,
weldment design and fabrication methods. Users are cautioned to confirm
by qualification testing, or other appropriate means, the suitability of
any welding consumable and procedure before use in the intended
application.